Kenwood 4/3/2 Channel Amplifier KAC 8404
Sound enthusiasts buy Kenwood amps for their superior quality, and the KAC-7205 is no exception. This compact 2-channel amplifier features a sturdy cast-aluminum chassis that is 30% smaller than last year’s model and supplies 600 Watts Max Power. Built-in high-pass and low-pass filters adjust the amplifier output so you’ll get the best sound possible from your speakers and subs. This amplifer also features a set of RCA outs Features a built in cooling fan for a longer amp life 4 channel @ 4 ohm 50x4 4 channel @ 2 ohm 150x4 2 channel @ 2 ohm 300x2 Crossovers LP, HP Type of inputs RCA & Speaker level Frequency Response 5HZ-50KHZ
Part #	Item	Price Each
KAC 8404	600 Watt Max Amp	$ 169.00

 

Kenwood Mono Channel Amplifier KAC 8105D
The KAC-8105D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power if ran with in a twin amp setup. The KAC-8105D includes a built-in infrasonic filter that helps subwoofers perform their best by sharply cutting off inaudible frequencies below 15 or 25 Hz. 500 Watts of Power with 30% Smaller Chassis Size High Quality Speaker Level Input and Blue Illumination Bass Boost Control 0-18 dB at 40 Hz) 11-1/16"W x 2-3/8"H x 9-7/8"D 1 channel @ 4 ohm 300x1 2 channel @ 2 ohm 500x1 Max Mono Power 1000x1 if paired w/ twin amp Crossovers LP Type of inputs RCA & Speaker level Frequency Response 10HZ-200HZ
Part #	Item	Price Each
KAC 8105D	500 Watt Max Amp 1000 watts if paired with twin amplifier	$ 169.00

 

Kenwood Mono Channel Amplifier KAC 9105D
The KAC-9105D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power if ran as a twin amp setup. The KAC-9105D includes a built-in infrasonic filter that helps subwoofers perform their best by sharply cutting off inaudible frequencies below 15 or 25 Hz. 500 Watts of Power with 30% Smaller Chassis Size High Quality Speaker Level Input and Blue Illumination Bass Boost Control 0-18 dB at 40 Hz) 13-11/16"W x 2-3/8"H x 9-5/16"D 1 channel @ 4 ohm 500x1 2 channel @ 2 ohm 900x1 Max Mono Power 1800x1 if paired w/ twin amp Crossovers LP Type of inputs RCA & Speaker level Frequency Response 10HZ-200HZ
Part #	Item	Price Each
KAC 9105D	900 Watt Max Amp 1800 watts if paired with twin amplifier	$ 169.00

 

Kenwood XR-1S eXcelon Reference Fit Mono Digital Power Amplifier
The eXcelon Reference Fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Duel Sigma Drive - This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and send out an opposite pulse to stop the speaker like an electronic brake. 1 channel @ 4 ohm 600x1 1channel @ 2 ohm 700x1 Max Mono Power 700x1 Crossovers LP Type of inputs RCA Frequency Response 10HZ-200HZ
Part #	Item	Price Each
XR-1S	700 Watt Max Amp	$ 169.00

 

Kenwood XR-4S eXcelon Reference Fit Mono Digital Power Amplifier
The eXcelon Reference Fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Duel Sigma Drive - This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and send out an opposite pulse to stop the speaker like an electronic brake. 4 channel @ 4 ohm 120x4 4 channel @ 2 ohm 150x4 Max Power 300x2 Crossovers HP, LP Type of inputs RCA Frequency Response 10HZ-200HZ
Part #	Item	Price Each
XR-4S	600 Watt Max Amp	$ 169.00

 

Kenwood X600F eXcelon Reference Fit Digital Power Amplifier
The Japanese kanji characters symbolize “powerfulness”. It is a character that stands for rigidity and strength. The X600F delivers clear, balanced musical reproduction thanks to Kenwood's exclusive K-STAT output transistors which are specially designed for music playback. The eXcelon Reference Fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Duel Sigma Drive - This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and send out an opposite pulse to stop the speaker like an electronic brake. 4 channel @ 4 ohm 100x4 RMS 4 channel @ 2 ohm 150x4 RMS Max Power 400x2 Crossovers HP, LP Type of inputs RCA Frequency Response 10HZ-200HZ
Part #	Item	Price Each
X600F	800 Watt Max Amp	$ 169.00

 

 

 

 

 

 

 

 

 

Any Brand Or Item You Don't Find On These Pages Please Call To Our Retail Location At 1 502 964-6652 Monday - Friday 10a to 6p Eastern Time, For Pricing & Availability ASK FOR Car stereo dept.