• FREE SHIPPING ON THIS GUN
• The BINKS BHV Kit Includes:
• 1.3 mm HVLP Gravity Feed Gun
• Optional 1.4 mm Fluid Tip and Needle
• 1000cc Aluminum Cup
• Air Adjusting Valve with Gauge
  Gun Wrench and Cleaning Brush
  Fluid Strainer
• Molded Carrying Case

• Finest quality silicone face piece for outstanding comfort ,easy cleanup & long life.
• Will not deteriorate after repeated washing & exposure to paints/solvents
• Combination cradle/neck strap for a non-slip comfortable fit
• Both types of Replaceable filter elements & rebuild kits available below

• FREE SHIPPING ON THIS GUN
• Mini HVLP detail gun, 1.0 mm fluid tip
• Includes cleaning brush and wrench
• Retail packaged
• Specifications:
  Operating Pressure: 10 to 30 PSI Maximum
  Inlet Pressure: 30 PSI @ 8 CFM

• FREE SHIPPING ON THIS GUN
• StartingLine Automotive Painting & Touch Up System
• Full Size HVLP Spray Gun, with 1.3mm Fluid Tip for paints & clears
• Full Size HVLP Spray Gun, with 1.8mm Fluid Tip for Spraying Primer
• Mini HVLP Detail Gun, 1.0mm Fluid Tip
• 2 - 20oz/600cc cup
• 1 - 8.5oz/250cc cup
• Includes: Air adjusting valve, cleaning brush and wrench
• Retail packaged
• Specifications:
  Operating Pressure: 10 to 30 PSI Maximum
  Inlet Pressure: 30 PSI @ 8-15 CFM

• 803070 - 1000cc (33oz) Large Size Aluminum Cup
• 802346 - 650cc (20oz) Medium Size Aluminum Cup
• 802347 - 250cc (8oz) Small Size Aluminum Cup
• 802427/802428 - Cup Lid & Seat Gasket Set 2 per package  

• FREE SHIPPING ON THIS GUN
• Includes: The air brush with .35mm tip, collector's tin and wrench.
• Feature's: Excellent Control Hairline detail to high paint-flow shading and gradual fades. Smooth double action trigger. Pre-set handle for precise control of paint flow. Solvent proof fluid passages, Teflon® needle packing. Copper, nickel and chrome plated light weight body for comfort, and less strain over extended uses. USA made backed by Devilbiss warranty.
• Versatility: Sprays automotive paints to water based inks. Removable 1/3 oz gravity cup with optional 1/4 oz and 1/2 oz cups available or spray with no cup at all.
• Specifications:
  Operating Pressure: 20 to 50 PSI Maximum
  Inlet Pressure: 175 PSI
  Needle Packing: Teflon

• FREE SHIPPING ON THESE GUNS
• New! Wider "D"-Shaped Pattern
• For more control when spraying small areas close up at lower flow rates.
• Available with 4oz. Plastic & Aluminum Cup.
• Pouring funnel, spanner wrench, gun hook, spray lube
• Replacement Cups Available.
• Recommended HAV-501 Seen Below Not Included.
• SRI-630G-08 Includes: 0.8mm fluid tip (installed), a 4oz. aluminum cup, a 4oz disposable plastic cup.
• Click Here For More Detailed Information on the DEVILBISS SRI Series Guns

• FREE SHIPPING ON THIS GUN
• Improved comfort and balance. New body style & two-finger trigger. Excellent atomization of solvent and waterborne materials
• ¼” to 9” fan pattern for everything from spot repairs to door jambs, bumpers, small panels, & motorcycle tanks
• Balanced air valve for smooth triggering and control during fading and blending. Eliminating the “kick” normally felt when triggering traditional guns
• Self-adjusting, smooth action needle packing
• Includes:
  •Two air caps! TS1 high efficiency and HS1 HVLP
  •1.0 mm fluid tip
  •Starter set of 9-oz. DeKups® disposable cups includes:
  •(8) lids and liners, (1) reusable sleeve & lid with (5) plugs, (1) gun adapter, (1) measuring guide, (1) 300-micron barrel paint filter, (1) 200-micron disk filter, (1) 125-micron disk filter, 4 oz. nylon cup, Wrench, gun hook, spray lube, (4) colored identification rings
• Air cap consumption:
  •TS1 high efficiency cap 3.5 cfm @ 30 psi
  •HS1 HVLP cap 4.8 cfm @ 30 psi

• SRI-478K12 4oz. Plastic Disp.Cup
• 81-381 8oz. Aluminum Cup
• 54-4458 4oz.  Aluminum Cup

• FREE SHIPPING ON THESE GUNS
• #3 HVLP air cap
• True 1-liter aluminum cup
• Recommended HAV-501 Seen Below Not Included
• Replacement tips & Cups Available Below
• Rebuild Kit and other accessories also available below
• Click Here For More Detailed Information on the Devilbiss Finishline Series Guns

• FREE SHIPPING ON THESE GUNS
• #3 HVLP air cap
• True 1-liter aluminum cup
• HAV-501 Gauge Included
• Replacement tips & Cups Available
• Rebuild Kit and other accessories also available below
• Click Here For More Detailed Information on the Devilbiss Finishline Series Guns

• FREE SHIPPING ON THIS GUN
• Reduces overspray & waste with HVLP technology
• Come with 3 different tips: 1.3mm(installed), 1.4mm, & 1.5mm tips
• Complete with 1-Liter aluminum cup with push on lid
• Comes with HAV-501, Air Cap Cleaning Kit, Gun Hook, Fluid Filter, Lube
• Replacement tips & Cups Available
• Rebuild Kit and other accessories also available below
• *Replacement Needle is needed if going to a 1.8mm or bigger tip.
• Click for Description

• FREE SHIPPING ON THIS GUN
• Reduces overspray & waste with RP technology while using less air
• Come with 3 different tips: 1.3mm(installed), 1.4mm, & 1.2mm tips
• Complete with 1-Liter aluminum cup (GFC-502) with push on lid
• Comes with HAV-511, Air Cap Cleaning Kit, Gun Hook, Fluid Filter, Lube
• Replacement tips & Cups Available
• Rebuild Kit and other accessories also available below
• *Replacement Needle is needed if going to a 1.8mm or bigger tip.
• Click for Description

• 190252 / GFC-501 20oz. Acetal Plastic Cup
• 120175 / GFC-502 1Liter Aluminum Cup
• 802199 / GFC-504 20oz. Aluminum Cup
• 190944 / GFC-404K2 2 Pack Replacement Lids for Aluminum Cups
• 191151 / KGP13K5    5 Pack Replacement Cup Gaskets

• The Ultimate in Productivity
• Saves Time and Money
• Better fluid flow for great color match
• Positive locking gun connection
• Refill without opening the cup
• Self-dispensing packaging
• Small, Medium , & Large Capacity Cups Available
   
• A - 802972/DPC 607 9oz. Reusable Frame & Lid Assembly's
• AA - 802102/DPC-602 9OZ. CUPS
• B - 802759/DPC 604/DPC-606 24OZ. Reusable Frame & Lid Assembly's
• BB - 802101/DPC-601 24OZ CUPS
• C - 802973/DPC 608 34oz. Reusable Frame & Lid Assembly's
• CC - 802100/DPC-600 34OZ CUPS
• Reusable Frame & Lid Assembly IN 2 Pk. SET
• Cups Packed In 32 CT. SET-UPS
• DD - 803510/DPC-5036-k24 packed in 24 CT set ups

• Various measuring guides and universal guides for the Dekup System
• Some Guides Are Universal, some guides are meant for specific paint mix ratios
• Guides Available for all 3 cup sizes: 9oz., 24oz., & 34oz.
• Packed 10 in a bag

• Cone Type Filters Packed 10 in a bag
• A - DPC-14-K10
  Coarse filter (600 micron) for Thick paint and flakes
• B - DPC-17-K10
  Fine filter (300 micron) for Colors and clears
• C - DPC-27-K10
  Very fine filter (200 micron) for pearls
• Disk Type Filters Packed 24 in a bag
• DB - 802978 24oz./32oz Black Frame / White mesh (200 Micron)
• DW - 802976 24oz./32oz White Frame / White mesh (125 Micron)
• EB - 802979 9oz. Black frame / White mesh (200 Micron)
• EW - 802977 9oz. White frame / White mesh (125 Micron) 

Gun not included

• Devilbiss Whirlwind™
• Longer life and less pressure drop
• Patented two-stage filter
  Stage 1 - Swirl Chamber - Removes large water droplets
  Stage 2 - Filter Media - Removes smaller water droplets, oil droplets, and dirt particles

• DS20 Desiccant Snake
  Dries Compressed Air in the Air Line. A unique design that combines desiccant drying with built in dirt and oil aerosol filters. Effective with both HVLP and Conventional spray equipment. approximately 2 Ft. in length.
• RHI01 Humidity indicator
  Works with the desiccant snake to let you know when humidity enters the line. Which also helps you to determine when to replace the desiccant snake.

• Provides clean, dry air at any drop in the paint and body shop.
• 5 micron particle filter – Removes bulk oil and water while filtering the air.
• 120 CFM filter capacity – For use with multiple spray guns and air tools.
• 50 CFM regulator capacity.
• Filtered main line outlet, also has an additional filtered regulated outlet.
• Simple filter element replacement – No tools required after bowl is removed. 1 filter included inside unit.
• Large bowl – less frequent draining of accumulated water.
• Easy installation – No elbow required. Air inlet located at top of unit in front of mounting bracket. Mounting bracket included
• Specifications
  ■ Air inlet: 1/2” N.P.T. (F)
  ■ Air outlet at shutoff valve: 1/4” NPSM (M)
  ■ Maximum pressure: 150 psi.

• The three-stage desiccant unit provides the ultimate in clean, dry air.
• First stage centrifugal filter removes particulates to 5 microns.
• Stage two coalescer filters down to .01 micron.
• Third stage desiccant removes remaining water vapor to a dew point of -40F.
• Ideally suited for low to medium production.
• DAD-500 air-drying system includes three filtering units, as well as a wall mount bracket and desiccant filter change indicator.
• Centrifugal and coalescer units include automatic bowl drain (standard feature), so there is no need to manually drain the system.
• Coalescer filter includes filter change indicator. Desiccant filter includes sight glass indicator (changes color when desiccant needs replacement).

Technical Specifications:

• Centrifugal Filtering Capacity: 5 micron
• Coalescer Filtering Capacity: .01 micron
• Flow Rate: 25 cfm
• Regulated Press. Range: 0-125 psi
• Max. Air Inlet Press.: 150 psi
• Max. Operating Temp.: 150 F
• Bowl Capacity: 17 oz.
• Weight: 35 lbs.
• Main Air Inlet: 1/2" NPT (F)
• Regulated Outlets: (1) 1/4" NPS (M)
• Air Regulators Included: (1) HAR-507
• Air Gauges (0-160 psi) 1

***When Replacing Desiccant Cartridge, replacement of humidity indicator is recommended. 

• CT Model Air Systems are the Complete Compressed Air Treatment Centers
• CT series desiccant air dryers remove water vapor from the compressed air down to a dew point of -40® F
• Feature Quick change 10 lb. desiccant cartridge bag is made of a special fiber media which removes oil aerosols and solid particles down to .01 microns - meaning no need for coalescing or final filters.
• Wall mount kit included.
• CT 30 DESICCANT AIR DRYER The desiccant air dryer is designed to be a point of use system. It is capable of removing dirt, water, oil, and water vapor from compressed air. It consists of a separator and desiccant cartridge. The cartridge has a housing material that acts like a coalescer and final filter.
• Specifications: 
• Air Inlet: 1/2" NPT (Female)
• Air Outlet:  1/2" NPT (Female)
• Air Flow Capacity : 30CFM
• Maximum Operating Pressure: 200 PSIG (14 Bar)
• Maximum Temperature Range:150F - 40F Dew Point
• Humidity Indicator: Green: OK Yellow: Replace Desiccant bag
• Particle Removal - Down to .01 micron
• Manual Drain - Included

***When Replacing Desiccant Cartridge bag, replacement of humidity indicator is recommended. 

• Same as the CT 30 and also includes:
• CT Plus 5-Stage compressed air treatment and drying center
• CT Model Air Systems are the Complete Compressed Air Treatment Centers
• Worry free air filtration for top quality paint jobs
• First stage filter removes oil, water, and dirt down to 5 microns
• Second stage coalescer removes oil vapors and dirt particles down to .01 microns
• CT30 desiccant tank repeats dirt and oil aerosol removal and eliminates humidity
• Easy and economical maintenance
• Longer desiccant life
• Air inlet valve shuts off CT Plus™ air without having to shut off shop air
• No tools needed to change first and second stage filters
• Easy change-out desiccant cartridge bag Ergonomic, self-relieving regulator 30 CFM capacity

***When Replacing Desiccant Cartridge bag, replacement of humidity indicator is recommended. 

• Devilbiss Spray Gun Wrench
• Can be used with Most Devilbiss Guns or Just about anyone's brands of spray equipment. Multi-holes in various sizes.

• Devilbiss Spray Gun Lube
  Can be used with any brands spray equipment 4oz size.
• Contains no silicone or petroleum distillates
• Compatible with all paint materials.

• Devilbiss Blow Gun
• Brightly colored so you will never lose it, the compact but rugged blow gun conforms to the very latest health & safety regulations.
• With 10 fine holes around a serrated outlet the jet really blasts out and is totally safe.
• Practical, rugged British made and well priced - what else could one ask for of a blow gun?
• Come in various different colors at random

• Gun Cleaning Bottle
• For cleaning guns
• Safe for use with most solvents

• Disposable Funnels
• For pouring in paint to Spray Gun Cups or Dekup systems

• High Output Air Adjusting Valves.
• Recommended for use with HVLP guns.
• HAV - 501 Standard Operation Range White Face
• HAV - 511 Optimal operation range indicated on gauge for GTI & Plus series Devilbiss spray guns.
• 0 - 160 range on gauge.

• Contains six precision tools designed to effectively clean spray guns
• Can be easily hung in the gun cleaning area
• Includes:
  Spray gun lube
  Cleaning instructions

Gun not included

• Mixing Bench Gun Holder
• Adjustable Strainer/filter Holder
• Works with most Spray Guns on the market
• Wide base for better stability
• Heavy duty construction 

• Most Economical Disposal Paint Cup System Available
• Saves painter's time with clean up and mess
• Saves money by greatly reducing solvent required to clean cup and inside of gun
• 48 Count Box
• Includes: Liners, fittings, and specialty tool in the box

• For use with any Devilbiss Finishline, PRI, GTI, or GFG Series spray guns.
• Hard Custom Molded Plastic Case.
• Space for extra tips, paper work, gun lube, cleaning kit, & other accessories
• Available in Single or Double Gun Models