Call Us Toll-Free Mon. - Fri. 9a - 5p To Place An Order Or Ask Questions:
1-800 541-0399

To Fax An Order To Us:
1-502 966-2239

Mail Us An Order At:
Smart Shoppers
4200 Produce Rd.
Louisville, Ky. 40218

Retail Store Hours

Mon.–Fri. 10a-6p Sat. 10a-3p

For more info in determining prices & shipping cost please see the help and/or company policy section

 


Autobody Supplies
Spray Guns & Accessories
Automotive Finish Products
Automotive Refinish Products
New Item Links
Paint Spray Booth Accessories
Compounds, Polishes & Waxes
Electric Buffers
Buffing Pads
Masking Products
Body Molding
Pinstripes
Sandpaper/Abrasives
Shop & Hand Tools
Air Tools
Respirators &
Fresh Air Systems
Sand Blasters
Air Fittings/Couplers
Clamps/Pulling Products

 

 

Kits & Limited Specials

 

 

 
 
Audio Equipment Section

 

Tire & Wheel Section

 

Bolt-On Section
 

 

 

 
Clearance Section

ALL THINGS CLEARANCE


 
 

HOUSE OF KOLOR - CHROMATE FREE EPOXY PRIMER SURFACER

Epoxy Primer Surfacer is designed to work over properly prepared bare aluminum, magnesium, fiberglass, steel galvanized and some woods and plastics. It may be applied to repair areas for fast filling of touch ups as well. It’s tenacious adhesion to substrates, fast build, and ease of sanding, wet or dry, makes it a logical choice for the base of a long lasting paint job.

  • Mix 1 part A Epoxy to 1 part B Catalyst by volume. Can be reduced up to 10% with RU Series reducer.

  • Order Part A and Part B for a complete kit.

Part #
Size
 KP-2CFA  Gallon
 KP-2CFB  Gallon
 KP-2CFA  Quart
 KP-2CFB  Quart
Click Here To See Pricing

 

HOUSE OF KOLOR - DIRECT TO METAL PRIMER SURFACER

Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion, resistance, productive dry times, and ease of sanding. These primers emit very low amounts of Volatile Organic Compounds (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. This primer may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC.

  • Mix 4 parts KD2000 to 1 part KDA2000 to 1 parts RU Series reducer (for 2.1 VOC, RU300 must be used).

Part #
Size
 KD2000  Gallon
 KDA2000  Quart
 KD2000  Quart
 KDA2000  Half Pint
Click Here To See Pricing

 

HOUSE OF KOLOR - KD3000 Series Kustom DTS Foundation Surfacer Sealers

KD3000 is a hybrid epoxy two component primer designed to be used as a DTS or Direct to Substrate High Build High Build Surfacer, Medium Build Surfacer/High Build Sealer, or silky smooth sealer. Available in 6 premixed colors which can be intermixed for a wide range of colors. KD3000 is an industry first and undisputedly the best foundation system available. KD3000 has excellent adhesion, corrosion resistance, productive dry times, and ease of sanding. These DTS surfacer/sealers emit very low amounts of Volatile Organic Compounds (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. The KD3000 Series DTS surfacer/sealers may be applied to the existing OEM finish, bare steel, aluminum, fiberglass, galvanized surfaces, and various plastics. Its tenacious adhesion, hi-build, excellent durability, and water and corrosion resistance and ease of sanding make it a superior choice for the basis of a long lasting custom paint job.

  • Mix 4 to 1 to use as a high build primer

  • Mix 4 to 1 to 1 to use as a medium build primer/sealer

  • Mix 4 to 1 to 2 to use as a sealer

Part #
Size

Color

 KD3000G  Gallon Nuetral Gray
 KD3000Q  Quart Neutral Gray
 KD3001  Quart Black
 KD3002  Quart White
 KD3003  Quart Yellow
 KD3004  Quart Red
 KD3005  Quart Blue
 KDA3000HP  Half Pint Hardener Clear
 KDA3000Q  Quart Hardener Clear
SHIMRIN 2 3000 PRIMER SERIES PRICES

 

HOUSE OF KOLOR - KO-SEAL II SEALER

Ko-Seal II is a two-component acrylic urethane primer sealer. Available in black, white, and metallic bases, this product meets VOC requirements nation wide.

  • Mix 4 parts KS Series primer to 1 part KU100\KU150 catalyst to 1 part RU Series reducer (for 2.1 VOC, RU300 must be used).

  • Can be tinted with any Kandy Koncentrate(KK) to adjust hue closer to a particular Kandy Kolor

Part #
Size

Color

 KS10  Quart White
 KS11  Quart Black
 KS12  Quart Silver Metallic
Click Here To See Pricing

 

HOUSE OF KOLOR - SS01 SILVER SEALER

SS01 House of Kolor Silver Sealer is the only silver sealer in the automotive paint business. Considered a must under all metallic based colors for easy to spray even coverage of metallic basecoats. Fewer topcoats will be necessary for additional savings. SS01 is a premium polyurethane catalyzed sealer system providing tenacious adhesion and long term color hold out. Engineered to work over House of Kolor’s new KD3000 Direct to Surface colored primer system, KP, KS, KD systems, and OE finishes. SS01 can also be custom tinted with up to 10% of Kandy Koncentrate for an even closer color match under Shimrin2® and original Shimrin® basecoats and Kandy basecoats.

  • Mix 6 parts SS01 to 1 part KU152 catalyst

  • Can not be applied to bare metal

Part #
Size

Color

 SS01  Quart Silver
Click Here To See Pricing

 

HOUSE OF KOLOR - BLEED CHECK SEALER

Bleed check is a two-component acrylic urethane sealer designed to stop the bleed through of products. Bleed Check will stop bleeding colors from interfering with artwork.

  • The following HOK products have a tendency to bleed: KBC05, KBC10, KBC13, KK05, KK10, KK13, UK05, UK10 and UK13. We recommend using Bleed Check over the products to protect artwork.

  • Mix 4 parts SBS10 to 1 part KU100\KU150 to 1 parts RU Series reducer, then add 6 ml of AX01 Accelerator per mixed quart of SBS10 Bleed Check used.

Part #
Size
 SBS-10  Quart
Click Here To See Pricing

 

HOUSE OF KOLOR - REDUCERS \ CATALYSTS
  • RU series Recommended reducers for use in any House of Kolor product.

  • RU series reducers come in a variety of temperature and V.O.C ranges

 

  • KU series are Required catalyst for use in some House of Kolor products.

  • KU series catalyst  come in a variety of temperature and V.O.C ranges

Part #
Size
Notes
 RU300  Gallon Must be used for 2.1 VOC rating
 RU300  Quart Must be used for 2.1 VOC rating
 RU310  Gallon Low Temps (60-70 Degrees)
 RU310  Quart Low Temps (60-70 Degrees)
 RU311  Gallon Mid Temps (70-85 Degrees)
 RU311  Quart Mid Temps (70-85 Degrees)
 RU312  Gallon High Temps (80-95 Degrees)
 RU312  Quart High Temps (80-95 Degrees)
 RU313  Quart Extreme High Temps (95+ Degrees)
 RU315  Quart Retarder

Click Here To See Pricing for Reducers

 KU100  Quart General use
 KU100  Pint General use
 KU150  Quart V.O.C Compliant use
 KU150  Half Pint V.O.C Compliant use
 KU151  Quart V.O.C Hot weather compliant use
 KU152  Half Pint Shimrin 2 Catalyst
 KU152  Quart Shimrin 2 Catalyst
Click Here To See Pricing for Catalyst

 

View Full Price List

   
View Color Charts View House of Kolor Tech Tip Library