Start To Finish Urethane Candy Paint Job Kit includes: 1 Gal. of Primer / Sealer (your choice of buff or grey) 1 Qt. of Activator for the primer 4 Qts of Quick Silver Base 4 Qts of Urethane Candy (your choice of color, you can even mix and match) 1 Gal. of EC100 PRO-FLO Clear 3 Qts. of Activator for use in the Base , Candy, & Clear 2 Qts. of Reducer for use in the Primer, Base, Color or Clear 15 each Paint sticks & Paint strainers 1 each Spray suit and Spray sock 3 1 Qt. Mixing cups 6 Tack Rags 3 Rolls masking tape Mixing instructions for all products   PRICE: $329.00 plus S&H

Click here To Get Printer Friendly Copy Of the directions to the kit

SPECTRA SERIES Urethane Candy Color System
 

Put down either ULTRA-GLO acrylic urethane paint, or UCB01 Quicksilver as a Base. SPECTRA Series candy colors may be applied over acrylic urethane anytime after final coat has flashed, but before 18 hours, without sanding. After 18 hours, base color must be scuff sanded prior to top coating.
APPLICATION:
When applying UCB01 Quicksilver Base, apply two (2) or three (3) medium coats. An extra coat
may be fogged as necessary to set even metallic pattern. Allow 15 to 25 minutes for flash time
between coats. Once base has flashed, apply candy color in medium wet coats as necessary to
achieve desired shade.

CUSTOMIZATION TIPS:
While infinite variations are possible with the SPECTRA Series, we offer these few tips to demonstrate several basic methods to spark your imagination and get you on the way toward creating your own unique, one-of-a-kind finish. Mix and match multiple candy colors to create custom shade variations. Blend one or more candy colors with UCB01 Quicksilver Base to tint the metallic base. Blend one or more candy colors with V2020 VisionClear to create a more subtle hint of color. Apply multiple coats of urethane clear between the base and candy to increase “float” effect. Apply custom art between the base and candy color for a shadow effect. Shift from one base color to another, then top with one uniform candy color for unique fade. Use factory-pack ULTRA-GLO acrylic urethane paints for different base color effects. Because the entire SPECTRA Series was designed on a common urethane platform, all of its parts (base, candy and clear) are completely interchangeable and use the same activator.

Dry times may vary slightly depending on shop temperatures and dried film thickness. SPECTRA Series candy colors and UCB01 Quicksilver Base may be re-coated after final coat has flashed but before 24 hours without sanding first. After 18 hours, these products must be sanded prior to re-coating. Wait 24 hours at 70F) before sanding to remove any
Contaminants or imperfections in the finish.
 

Pot life: is approximately two hours at 70°F, less for elevated temperatures. Caution: Mix only as much material as you will need to complete the immediate job.

Note: SPECTRA SERIES Candy colors will become increasingly darker
with each additional coat applied. By adjusting the number of coats, it is possible to change the
shade of your final finish to appear lighter or darker than the color chip.
 

Suggested Spray gun Tip Size: 1.2mm - 1.4mm tip

Dry Times @ 70 degrees:

Dust Free 15-20 mins
Wet Sand 4 Hrs
Full Cure 24 Hrs (These can be recoated any time after flash (15-20 minutes) or before 24 hours, without sanding.  If recoating after 18 hours, then candy must be scuff sanded before it can be topcoated.)