• Provides clean, dry air at any drop in the paint and body shop.
• 5 micron particle filter – Removes bulk oil and water while filtering the air.
• 120 CFM filter capacity – For use with multiple spray guns and air tools.
• 50 CFM regulator capacity.
• Filtered main line outlet, also has an additional filtered regulated outlet.
• Simple filter element replacement – No tools required after bowl is removed. 1 filter included inside unit.
• Large bowl – less frequent draining of accumulated water.
• Easy installation – No elbow required. Air inlet located at top of unit in front of mounting bracket. Mounting bracket included
• Specifications
  ■ Air inlet: 1/2” N.P.T. (F)
  ■ Air outlet at shutoff valve: 1/4” NPSM (M)
  ■ Maximum pressure: 150 psi.

• Removes the contaminants within your air supply that pose a significant risk to finish quality. Sharpe has the filter for you.
• Removes oil particles down to .5 micron level
• Filtering capacity 50 CFM @ up to 75 PSI
• Self-relieving air regulator, mounting bracket, and shut-off valve included
• 3/8" in and 3/8" out

• Removes the contaminants within your air supply that pose a significant risk to finish quality. Sharpe has the filter for you.
• Removes oil particles down to .5 micron level
• Filtering capacity 120 CFM @ up to 200 PSI
• Self-relieving air regulator, mounting bracket, and shut-off valve included
• 1/2" in and 1/4" out

• CT Model Air Systems are the Complete Compressed Air Treatment Centers
• CT series desiccant air dryers remove water vapor from the compressed air down to a dew point of -40ฎ F
• Feature Quick change 10 lb. desiccant cartridge bag is made of a special fiber media which removes oil aerosols and solid particles down to .01 microns - meaning no need for coalescing or final filters.
• Wall mount kit included.
• Includes regulator gauge and shut off valve.
• CT-30 DESICCANT AIR DRYER The desiccant air dryer is designed to be a point of use system. It is capable of removing dirt, water, oil, and water vapor from compressed air. It consists of a separator and desiccant cartridge. The cartridge has a housing material that acts like a coalescer and final filter.
• Specifications: 
• Air Inlet: 1/2" NPT (Female)
• Air Outlet:  1/2" NPT (Female)
• Air Flow Capacity : 30CFM
• Maximum Operating Pressure: 200 PSIG (14 Bar)
• Maximum Temperature Range:150F - 40F Dew Point
• Humidity Indicator: Green: OK Yellow: Replace Desiccant bag
• Particle Removal - Down to .01 micron
• Manual Drain - Included

***When Replacing Desiccant Cartridge bag, replacement of humidity indicator is recommended. 

• Maintains -40บF dew point while achieving 0% compressed air humidity
• Removes oil particles down to .01 micron
• Contains desiccant beads which change color when saturated
• Filtering capacity 30 CFM, @ up to 175 psi
• Self-relieving air regulator, mounting bracket, and shut-off valve included
• Replacement desiccant beads, 1 gallon (part no 6765-1)

• New Wave in Air Dryer Technology. Originally designed for OEM application. Now available for shop use.
• Maintenance-Free Membrane Dryer – No refrigerants or desiccants to replace - No Regeneration Required.
• Stage 1 Filter provides removal of water and contaminates down to 5 Microns.
• Stage 2 Coalescer provides removal of oil and sub-micronic particles down to .01 microns.
• Maintains – 40ฐ F Dew Point while achieving 0% compressed air humidity.
• Filtering capacity 30 CFM @ up to 175 PSI
• Lightweight, easy-to-install, simple to operate