MIN. UPS ORDER IS $50.00,  MIN. TRUCK ORDER IS 250 LBS. OF MIX & MATCH MATERIALS.  FOR MORE INFO CHECK THE COMPANY POLICY SECTION.

Payments
Call Us Toll-Free Mon. - Fri. 9a - 5p To Place An Order Or Ask Questions:
1-800 541-0399

To Fax An Order To Us:
1-502 966-2239
Mail Us An Order At:
Smart Shoppers
4200 Produce Rd.
Louisville, Ky. 40218

For more info in determining prices & shipping cost please see the help and/or company policy section

 


Autobody Supplies
Spray Guns & Accessories
Automotive Finish Products
Automotive Refinish Products
New Item Links
Paint Spray Booth Accessories
Compounds, Polishes & Waxes
Electric Buffers
Buffing Pads
Masking Products
Body Molding
Pinstripes
Sandpaper/Abrasives
Shop & Hand Tools
Air Tools
Respirators &
Fresh Air Systems
Sand Blasters
Air Fittings/Couplers
Clamps/Pulling Products

 

 

 Kits & Limited Specials

 

 
 
 
Audio Equipment Section

 
Tire & Wheel Section

 

Bolt-On Section
 

 

 
 
Clearance Section

ALL THINGS CLEARANCE

 
 
Accessories

Just about anything you need to accessorize your Spray Gun from Gun Stands, to Cup Liners, to Air Gauges, to Water Separators, to Paint Gun Washers can be found here.

  

ATD Pneumatic Spray Gun Water Filters #7812
  • Traps moisture, rust, scale and oil aerosols that pass through conventional filters
  • Can be used right before the air goes into any  spray gun or any air tool.
    • Air Inlet NPT: 1/4"
    • Air Outlet NPT: 1/4"
Part #
Item
 Count
Price Each
6803 Spray Gun Water Filter 1 Single $ 3.25
6803 Spray Gun Water Filter 3 Pack $ 8.25

 

Devilbiss DS20 Desiccant Snake / RHI01 Humidity indicator

 
  • DS20 Desiccant Snake
    Dries Compressed Air in the Air Line. A unique design that combines desiccant drying with built in dirt and oil aerosol filters. Effective with both HVLP and Conventional spray equipment. approximately 2 Ft. in length.
  • RHI01 Humidity indicator
    Works with the desiccant snake to let you know when humidity enters the line. Which also helps you to determine when to replace the desiccant snake.
Part #
Size / Item
Price Each
130502 DS20 Snake $ 18.50
130503 RHI01Indicator $ 25.00

 

The Disposable Desiccant Filter by Motor Guard
  • Motor Guard's newest addition to its compressed air filter line. The only disposable compressed air filter for spray guns that includes a unique color change indicator to signal time to change out the filter.
  • Absorbs oil, condensed moisture, and contaminants as small as 5 microns. Attaches directly to the air inlet of the spray gun.
DD-1008 Disposable Desiccant Filter Specifications
Model No. Application Pipe Size Max Flow
@ 80 psi		 Maximum
Pressure		 Removal
Rating (NOM.)		 Size
DD-1008 3 1/2" x 1 1/2" 1/4" NPS/NPT 100 psi 20 CFM 5 Microns Spray Gun
Part #
Description
Price Each
DD1008 - CJ Disposable Desiccant Filter $ 6.50

 

Motor Guard M45-Kit
  • 1/4" NPT Inlet & Outlet
  • The Ultimate Defense From Damaging Dirty Air
  • The perfect final filter
  • Eliminates paint failures caused by particulates, moisture and oil aerosol contaminates as small as .01 micron.
  • The air tool saver. Extends the life of your tools by protecting bearings and precision parts from dirty, oily watery contaminants
  • Contains 1 M-30 Filter housing with hardware
  • Comes with 3 elements (filters) total. Comes with 1 element installed and 2 extra
Part #
Item
Price Each
M-45-KIT Filter Kit with 1/4" in and out $ 69.50

 

Motor Guard M100-Kit
  • 1/2" NPT Inlet & Outlet
  • The Ultimate Defense From Damaging Dirty Air
  • The perfect final filter
  • Eliminates paint failures caused by particulates, moisture and oil aerosol contaminates as small as .01 micron.
  • The air tool saver. Extends the life of your tools by protecting bearings and precision parts from dirty, oily watery contaminants
  • Contains 1 M-60 Filter housing with hardware
  • Comes with 3 elements (filters) total. Comes with 1 element installed and 2 extra
Part #
Item
Price Each
M-100-KIT Filter Kit with 1/2" in and out $ 69.50

 

Motor Guard Activated Carbon Filter MC100-Kit
  • 1/2" NPT Inlet & Outlet
  • The Motor Guard Model MC100 Activated Carbon Filter removes oil vapor and other contaminants from compressed air through the adsorption process. In this process, microscopic pores in the activated carbon media trap individual oil molecules while clean air passes through.
  • As shops are learning, the new waterborne automotive finishes require new air treatment tools. Waterborne finishes require air that is free of oil vapor. Standard oil removing filters absorb oil mist and fine droplets while vaporized oil passes right through where it causes finishing flaws.
  • The Motor Guard's Activated Carbon Filter features the exclusive Carbon-cartridge. The filter element contains an expanded volume of activated carbon media to deliver air to the spray gun that is virtually free of oil vapor (<.01 ppm by weight). Designed for maximum airflow at a minimum pressure drop, the extended carbon content of the Carbon-cartridge means that compressed air spends the maximum time in contact with the carbon media for more complete vapor removal.
  • The addition of the MC100 as the final stage in an existing air management system ensures defect-free finishing with waterborne or any finishing materials.
  • Replacement elements sold in (2) twin packs only
Part #
Item
Price Each
MC100-KIT Filter Kit with 1/2" in and out $ 85.00
M - 785C Twin Pack Replacement Activated Carbon Filters For the MC-100 Only $ 42.00

 

Astro Pneumatic Air Control Unit - 120cfm Capacity #2618
  • Description
  • Air Inlet/Outlet: ½ "NPT
  • Filtration Degree: 5µm
  • Regulator Capacity: 50 CFM
  • Filter Capacity: 120 CFM
  • Filter and regulator in one
  • Easy to install for light to medium industrial and automotive applications
  • Remove water, oil and contaminants (down to 5µm) from compressed air, and provide constant air supply
  • Improve performance and useful life of air-tools
  • Easy reusable/replaceable in-line filter
  • Strong Aluminum housing for extensive use
  • Drain valve designed to empty filters without dissembling the unit.
Part #
Size / Item
Price Each
2618 Air Control Unit - 120cfm Capacity $ 65.00

 

Devilbiss Finishline Water Separator and Particle Filter With Regulator

 
  • Provides clean, dry air at any drop in the paint and body shop.
  • 5 micron particle filter – Removes bulk oil and water while filtering the air.
  • 120 CFM filter capacity – For use with multiple spray guns and air tools.
  • 50 CFM regulator capacity.
  • Filtered main line outlet, also has an additional filtered regulated outlet.
  • Simple filter element replacement – No tools required after bowl is removed. 1 filter included inside unit.
  • Large bowl – less frequent draining of accumulated water.
  • Easy installation – No elbow required. Air inlet located at top of unit in front of mounting bracket. Mounting bracket included
  • Specifications
    ■ Air inlet: 1/2” N.P.T. (F)
    ■ Air outlet at shutoff valve: 1/4” NPSM (M)
    ■ Maximum pressure: 150 psi.
Part #
Size / Item
Price Each
HAR - 602 Finishline Water Separator and Particle Filter With Regulator $ 97.50
HAF - 39 Replacement Filter Element with gasket $ 14.00

 

Devilbiss CT30 Desiccant Dry Air System
 
  • CT Model Air Systems are the Complete Compressed Air Treatment Centers
  • CT series desiccant air dryers remove water vapor from the compressed air down to a dew point of -40® F
  • Feature Quick change 10 lb. desiccant cartridge bag is made of a special fiber media which removes oil aerosols and solid particles down to .01 microns - meaning no need for coalescing or final filters.
  • Wall mount kit included.
  • Includes regulator gauge and shut off valve.
  • CT 30 DESICCANT AIR DRYER The desiccant air dryer is designed to be a point of use system. It is capable of removing dirt, water, oil, and water vapor from compressed air. It consists of a separator and desiccant cartridge. The cartridge has a housing material that acts like a coalescer and final filter.
  • Specifications: 
  • Air Inlet: 1/2" NPT (Female)
  • Air Outlet:  1/2" NPT (Female)
  • Air Flow Capacity : 30CFM
  • Maximum Operating Pressure: 200 PSIG (14 Bar)
  • Maximum Temperature Range:150F - 40F Dew Point
  • Humidity Indicator: Green: OK Yellow: Replace Desiccant bag
  • Particle Removal - Down to .01 micron
  • Manual Drain - Included

***When Replacing Desiccant Cartridge bag, replacement of humidity indicator is recommended. 

Part #
Size / Item
Price Each
130500 Wall Mount System W/Regulator & gauge CT - 30 - RG $ 269.50
130504 Replacement Desiccant Filter 10lb. Bag DC 30 $ 61.50
130505 Replacement Humidity Indicator MI - 30 $ 16.50
130510 Replacement Gasket for the CT-30 tank $ 14.00

 

Devilbiss CT30 Plus Desiccant Dry Air System
  • Same as the CT 30 and also includes:
  • CT Plus 5-Stage compressed air treatment and drying center
  • CT Model Air Systems are the Complete Compressed Air Treatment Centers
  • Worry free air filtration for top quality paint jobs
  • First stage filter removes oil, water, and dirt down to 5 microns
  • Second stage coalescer removes oil vapors and dirt particles down to .01 microns
  • CT30 desiccant tank repeats dirt and oil aerosol removal and eliminates humidity
  • Easy and economical maintenance
  • Longer desiccant life
  • Air inlet valve shuts off CT Plus™ air without having to shut off shop air
  • No tools needed to change first and second stage filters
  • Easy change-out desiccant cartridge bag Ergonomic, self-relieving regulator 30 CFM capacity

***When Replacing Desiccant Cartridge bag, replacement of humidity indicator is recommended. 

Part #
Size / Item
Price Each
130522 Wall Mount System W/Regulator & gauge CT - 30 Plus $ 399.50
130504 Replacement Desiccant Filter 10lb. Bag DC 30 $ 61.50
130505 Replacement Humidity Indicator MI - 30 $ 16.50
130510 Replacement Gasket for the CT-30 tank $ 14.00
130517 Replacement Water Filter Element $ 30.00
130518 Replacement Coalescing Filter Element $ 79.50

 

Astro Pneumatic Brass Air Regulator #5706
  • 1/4" fittings.
  • Increases or decreases air pressure as desired
  • Air Inlet NPT: 1/4"
  • Air Outlet NPT: 1/4"
Part #
Item
Price Each
5706 Brass Air Regulator $ 2.50

 

Astro Pneumatic Air Adjusting Valve W/Gauge #WS-11
  • Provides fine air control for spray guns and air tools
  • Swivel top allows for easy installation
  • Includes a 0-160 PSI pressure gauge
  • Air Inlet NPT: 1/4"
  • Air Outlet NPT: 1/4"
Part #
Size / Item
Price Each
WS - 11 Air Adjusting Valve with gauge $ 7.50

 

Devilbiss Air Adjusting Valves
  • High Output Air Adjusting Valves.
  • Recommended for use with HVLP guns.
  • HAV - 501 Standard Operation Range White Face
  • HAV - 511 Optimal operation range indicated on gauge for GTI & Plus series Devilbiss spray guns.
  • 0 - 160 range on gauge.
Part #
Size / Item
Price Each
180006 HAV - 501 Standard Air Adjusting Valve / Gauge $ 19.50
180089 HAV - 511 GTI & Plus Air Adjusting Valve / Gauge $ 25.00

 

Astro Pneumatic Digital Diaphragm Regulator #2661
  • Provides accurate measurement and adjustment of air flow for spray guns and other air-operated tools and equipment.
  • Ensures accurate and consistent air pressures at the gun
  • Beautifully plated with mirror finish
  • Digital read-out plate is made from impact-proof glass
  • The unit has sealed electronics, with a non replaceable battery which will last approximately two years
  • The battery simply switches itself off when not in use
  • It screws directly onto the gun inlet with a loose nut fitting.
  • This enable the read-out screen to be swiveled to suit right or left-handed sprayers
  • Diaphragm regulator provides a consistent air pressure for spraying application
Part #
Size / Item
Price Each
2661 Digital Gauge $ 39.50

 

3/8" Polyurethane Air Hose
  • 1/4" fittings.
  • USA made durable air hose.
  • Quality Polyurethane Hose not a low grade rubber hose
  • Fits any standard air tool or compressor.
Part #
Item
Price Each
25Ft. Air Hose 25Ft. Air Hose $ 9.50
50Ft. Air Hose 50Ft. Air Hose $ 14.50

 

HUTCHINS AIR HOSE

  • Clear, Crushproof, Reinforced construction allows instant detection of airborne contamination
  • Anti-Static design decreases electrical charge to improve metallic orientation for both solvent & water based paints
  • Reduces static charge on plastic parts and bumpers
  • Lightweight, Durable with large inside diameter improves airflow for better spray gun & air tool operation
  • Swiveling end is perfect for Hi-Flow couplers!
  • Operating Pressure to 225 PSI
  • Operating Temperature to 150 F
  • Available in 35': Part No. 1361-3A-35
    Available in 50'" Part No 1361-3A-50
  • SEE HUTCHINS PAGE UNDER AIR TOOLS FOR MAPP PRICING EXPLANATION
Part #
Size / Item
Mapp Price
1361-3A-35 35' FOOT AIR HOSE $ 60.98
1361-3A-50 50 FOOT AIR HOSE $ 87.08