MIN. UPS ORDER IS $50.00,  MIN. TRUCK ORDER IS 250 LBS. OF MIX & MATCH MATERIALS.  FOR MORE INFO CHECK THE COMPANY POLICY SECTION.

REMEMBER AS TEMPERATURES CHANGES, THAT THE MATERIAL YOU ARE USEING AS WELL AS THE SURFACE YOU ARE PAINTING NEEDS TO BE THE SAME TEMP. ALSO NOTE REDUCER IF USED NEEDS TO BE IN THE RIGHT TEMP RANGE


Call Us Toll-Free Mon. - Fri. 9a - 5p To Place An Order Or Ask Questions:
1-800 541-0399

To Fax An Order To Us:
1-502 966-2239

Mail Us An Order At:
Smart Shoppers
4200 Produce Rd.
Louisville, Ky. 40218

Retail Store Hours

Mon.–Fri. 10a-6p Sat. 10a-3p

For more info in determining prices & shipping cost please see the help and/or company policy section

 


Autobody Supplies
Spray Guns & Accessories
Automotive Finish Products
Automotive Refinish Products
New Item Links
Paint Spray Booth Accessories
Compounds, Polishes & Waxes
Electric Buffers
Buffing Pads
Masking Products
Body Molding
Pinstripes
Sandpaper/Abrasives
Shop & Hand Tools
Air Tools
Respirators &
Fresh Air Systems
Sand Blasters
Air Fittings/Couplers
Clamps/Pulling Products

 

 

Kits & Limited Specials

 

 

 
 
Audio Equipment Section

 

Tire & Wheel Section

 

Bolt-On Section
 

 

 

 
Clearance Section

ALL THINGS CLEARANCE


 
 
 

Clausen Lighten - Up Ultra White Tack Free Body Filler "Eliminates Bleed Through"
  • Lighten - Up is an ultra-white, ultra-smooth, tack - free, premier body filler which is self-etching, zinc enriched, flexible, pin-hole-free & guaranteed in writing to eliminate bleed-through.
  • Climatized - works in warm or cool temperatures
  • Can be used with Smooth out seen below
  • Includes Hardener
  • Click To View Product Warranty In PDF Format
Part #
Container Size
Per Item
Truck Each
LU-2 Gallon $ 41.50 $ 33.00

 

Clausen Z-Chrome - Premium Lightweight Yellow Body Filler
  • Z-Chrome is a self etching, stain resistant, lightweight body filler which renews the lifetime corrosion protection system offered by O.E. Manufacturers against outer-body rust on zinc dipped and galvanized sheet metal.
  • Includes hardener
  • Can be used with Smooth out seen below
Part #
Container Size
Per Item
Truck Each
ZC-2 Gallon $ 29.50 $ 20.50
ZC-1 Quart $ 11.50 $ 9.00

 

Clausen Classic Plastic - The Original Light Weight Body Filler
  • Basic Professional lightweight autobody filler.
  • Saves time and money: average cure time before priming is 1 hour at 80 degrees
  • Easy to mix, apply, grate, and sand.
  • Low dust formula and less waste.
  • Can be used with Smooth out seen below.
  • Includes Hardener.
Part #
Container Size
Per Item
Truck Each
CP-2 Gallon $ 23.00 $ 14.50

 

Clausen Z-Chrome Z-Glas - Extra Extra Fine Haired Fiberglass Body Filler
  • Z-Glass is a Kevlar Reinforced microscopic fiberglass filler that is self etching and waterproof. Designed to bridge holes in metal and fiberglass parts, it is unequaled in smoothness.
  • It can be finished to primer ready.
  • No need to use both fiberglass and then body filler.
  • Includes hardener
  • Can be used with Smooth out seen below
Part #
Container Size
Per Item
Truck Each
ZGF-2 Gallon $ 44.00 $ 34.00
ZGF-1 Quart $ 16.00 $ 13.00

 

Clausen Claw Glas - Multi-Propose Short Haired Fiberglass Body Filler
  • Claw Glass a multi purpose reinforced fiberglass filler that is self etching and waterproof. designed to bridge holes in metal and fiberglass parts, it is unequaled in smoothness.
  • It can be finished to primer ready.
  • No need to use both fiberglass and then body filler.
  • Includes hardener
  • Can be used with Smooth out seen below
Part #
Container Size
Per Item
Truck Each
CGF-2 Gallon $ 40.50 $ 30.50
CGF-1 Quart $ 15.00 $ 12.00

 

Clausen Gorilla Hair - Long Haired Fiberglass Body Filler
  • Gorilla Hair is a long strand fiberglass filler that is self etching and waterproof. designed to bridge larger holes in metal and fiberglass parts, it is unequaled in smoothness.
  • It can be finished to primer ready.
  • No need to use both fiberglass and then body filler.
  • Includes hardener
  • Can be used with Smooth out seen below
Part #
Container Size
Per Item
Truck Each
GH-2 Gallon $ 39.50 $ 29.50
GH-1 Quart $ 14.00 $ 11.00

 

Clausen Claw Glas - Resin Filler
  • GLAW GLAS RESIN IS A MARINE GRADE POLYESTER RESIN, used for repair of metal, fiberglass and wood
  • Provides excellent wet out properties along with tremendous adhesion.
  • It is easy to work with and is typically used with cloth or mat reinforcements.
  • Includes hardener
Part #
Container Size
Per Item
Truck Each
CGFR-2 Gallon $ 53.50 $ 43.50
CGFR-1 Quart $ 16.75 $ 13.75
LH-3 Extra 40cc Hardener $ 3.00 $ 2.25
LH-2 Extra 11cc Hardener $ 2.25 $ 1.75

 

Clausen Mat
  • CLAW GLAS FIBERGLASS MAT REINFORCEMENT for use with Claw Glas Resin is packaged in 8 and 24 sq. ft. sizes.
  • Mat is stiffer.
Part #
Container Size
Per Item
Truck Each
FM-3 Fiberglass Mat 24 Sq. Ft. $ 12.50 $ 9.50
FM-1 Fiberglass Mat 8 Sq. Ft. $ 5.50 $ 4.50
FC-1 Fiberglass Cloth 8 Sq. Ft. $ 7.50 $ 4.50

 

Clausen Z-Glaze Lite- Light Weight Polyester Glazing Putty
  • Self - Etching, Stain Free, Soft Sanding, Tack Free, Pinhole free, Wet or Dry Sandable.
  • Include Hardener
  • Can be used with Smooth out seen below
Part #
Container Size
Per Item
Truck Each
ZGL-4 1/2 Gallon $ 32.50 $ 27.50
ZGL-3 Quart $ 17.00 $ 14.50

 

Clausen Gold Rush Polyester Glazing Autobody Filler / Putty - LIMITED
 
  • Zinc enriched, extra creamy, self etching polyester glazing filler.
  • Adheres to just about anything used in the Autobody industry.
  • Easy sanding, pinhole free finish.
  • Stain free no bleed through.
  • Flexible for plastics and fiberglass no cracking or shrinkage.
  • Compatible with all paint systems.
  • Includes Hardener.
Part #
Container Size
Per Item
Truck Each
GR-2

6.5 LB Tin -LIMITED

$ 37.00 $ 29.50

 

Clausen Smoothout - Honey Smooth Resin Additive & Reducer
  • Thins Out All Plastic Based Fillers.
  • Eliminates Pinholes
  • Reduces Spreader Drag
  • Increases Adhesion
Part #
Container Size
Per Item
Truck Each
SO-2

Quart

$ 21.50 $ 18.50
 

 

 Product Description    Size   Each     25 Count   50 Count
 2" Spreaders bulk package    2"  $ .16        $ 3.75 $ 7.00
 4" Spreaders bulk package    4"  $ .23        $ 5.50 $ 10.50
 5" Spreaders bulk package    5"  $ .28        $ 7.00 $ 13.50
 6" Spreaders bulk package    6"  $ .33        $ 8.00 $14.50
Part# Product Description -USED for  Putties, Body Fillers etc.  Size  Per Item TRUCK EA.
 307 Clausen Extra Red Cream Hardener  - 2.75 oz $2.50 $2.00
 308 Clausen Extra Blue Cream Hardener - 2.75 oz $2.50 $2.00
 Part#  Product Description
        
            
 UPS 
 125  24 COUNT 10" Half-Round Cheesegrater File Blades - For Part #101     $10.00
 126  10" Flat File Blades - For Part #101     $1.50
 Part#  Product Description
Size
Case Qty.
UPS 
40833 9  Indasa Disposable Paper Mixing Board (100 count sheets)

12x12

n/a

$7.50
 108  3 gallon Body Filler Dispenser Kit Material Saver
----
--
$50.00
 Part#  Product Description
Per Box
5+ Boxes
10+ Boxes
 1000  Single Edge Razor Blades - 100 Pack
$4.25
$4.00
$3.75     

Clausen Sandy Sprayable Plastic Filler Primer
Sandy
  • Sandy goes on easy .... builds up fast. primes, fills, and seals all in one product. save time money and materials.
  • Self etching, self leveling used for  reconditioning gravel chips, hairline cracks, crazed paint, decals, pits, sand scratches, etc.
  • Two coats of sandy then sanding equals to several coats of other primers, sanding multiple times, glazing several times and sealing.
  • Contains no solvents to react with old paint, primers and clears.
  • Can be top coated with almost every finish made today including base/clear, urethanes, enamels, etc.
  • Comes in light gray only.
  • HARDENER INCLUDED   
Part #
          Color / Container Size
Per Item
Truck Each
201200 Light Gray Gallon $ 89.50 $ 75.00
201100 Light Gray Quart $ 32.00 $ 29.00
         
PLH-3 Extra Clear Hardener 40cc $ 4.50 $ 3.50
PLH-2 Extra Clear Hardener 11cc $ 2.75 $ 2.00

 

Clausen ALL-U-NEED Primer
 

For Comparisons To other Primers Click Here

  • ALL-U-NEED is a zinc enriched, self etching, one-step high build polyester primer-surfacer-sealer finishing system.
  • Better version of rust defender / sandy sprayable plastic fillers
  • For use over bare metal, body filler, plastic, wood, aluminum, or fiberglass.
  • Resistant to penetration of moisture & most solvents.
  • High solids, low 2.01 V.O.C and is Isocyanate-free.
  • Compatible with Base/Clear, Urethane, & Acrylic Enamel Systems
  • Replaces Metal Prep's, etching primer's, & sealer's
  • Easy Sanding with wet or dry methods, Built-in guide coat
  • Available in 5 different colors
  • Includes hardener 

Click Here For Application Guide & Other Information

Part #
          Color / Container Size
Per Item
Truck Each
AUNDG-2 Dark Gray Gallon $ 127.50 $ 112.00
AUNDG-1 Dark Gray Quart $ 43.00 $ 40.00
AUNLG-2 Light Gray Gallon $ 127.50 $ 112.00
AUNLG-1 Light Gray Quart $ 43.00 $ 40.00
AUNR-2 Red Gallon $ 127.50 $ 112.00
AUNR-1 Red Quart $ 43.00 $ 40.00
AUNT-2 Tan Gallon $ 127.50 $ 112.00
AUNT-1 Tan Quart $ 43.00 $ 40.00
AUNW-2 White Gallon $ 127.50 $ 112.00
AUNW-1 White Quart $ 43.00 $ 40.00
         
PLH-3 Extra Clear Hardener 40cc $ 4.50 $ 3.50
PLH-2 Extra Clear Hardener 11cc $ 2.75 $ 2.00

The true American success story of The Clausen Company is one of two friends who always dreamed of owning their own business and who took a chance on a new polyester autobody filler product. Hans Clausen, a plumber, and Tyrus W. Peck, a chemist, pioneers in the automotive aftermarket founded the business in 1957. But only half a dream came true. Clausen died in July 1961 without realizing the dream he had always had.

Situated in the heart of Central Jersey’s secondary petrochemical processing industries, under the leadership of the Peck Family, The Clausen Company has always employed a diverse work force. Many employees have enjoyed working their full working careers here with fully paid benefits. With flexible hours and a unique four-day workweek, employees have more time to be involved with their families.

In addition to being philanthropic, The Clausen Company maintains an energy conservation program, including recycling, and is proud of its environmental commitment. We have no underground chemical storage and have received a New Jersey D.E.P. clean site citation.

As a family-owned business, The Clausen Company has been a driving force in innovation, manufacturing a full line of high quality, professional, unique and problem-solving automotive refinishing products, which are both time and labor savers, and designed to simplify professional autobody repair.

In 1975 The Clausen Company was the first to successfully produce and market internationally a lightweight autobody filler under the brand name, Classic Plastic, which replaced the old-style heavy weight product, saving time and labor, with easy application and much less dust and waste.

In 1985 The Clausen Company introduced the first self-etching products by any company in the United States. These products are Z-Chrome Autobody Filler, Z-Glas Fiberglass Reinforced Filler and Rust Defender Hi-Build Polyester Primer. All are designed to adhere to zinc-dipped or galvanized sheet metal and renew the “corrosion protection system” offered by O.E. Manufacturers.

In 1990 The Clausen Company introduced two additional self-etching products, Lighten-Up, an ultra-white lightweight premium autobody filler designed to eliminate top coat staining, and Z-Glaze, a soft sanding ultra white lightweight polyester glazing putty that prevents bleedthrough and adheres to galvanized and zinc coated surfaces.

After 15 years of producing self-etching autobody, fiberglass fillers and polyester primers, The Clausen Company introduced another “first” in the industry, All-U-Need, the ultimate hi-build, “one step” polyester Primer-Surfacer-Sealer, compatible with all paints and primers, and the “first” polyester primer available in Light Gray, Dark Gray, Tan, White and Red colors. As with our other innovative product ideas, a guide coat was developed within this product. The guide coat allows users to easily detect low or high areas in their panels.