 |
#0045 Angle Bite Clamp
The Angle Bite is Mo-Clamp's new sure-gripping, self-cleaning, self tightening clamp with a
gator tooth design and has a 45 degree head for those hard to pull areas, such as the Mercedes 107 front
chassie rail. |
#0045
Angle Bite Clamp
Price: $54.00 each |
| |
|
|
 |
#0053 A Clamp with Pull Ring
With a new tooth design by Mo-Clamp, the A Clamp grips narrow seams and ridges. Hardened steel teeth assure pull. Use with ¼" chain. |
#0053
A Clamp W/ Pull Ring
Price:
$46.50 each |
| |
|
|
 |
#0054 Mini Spring Clamp
1½" width. Spring loaded to hold jaws open which make it easier to use. With oval loop for easy hook-up. For light sheet metal in those tight places. |
#0054
Mini Spring Clamp
Price:
$50.00 each |
| |
|
|
 |
#0100 B Clamp
Self tightening. The body man's right arm. It grabs 2¼" of metal making it ideal for hard pulls on metal or frame. |
#0100
B Clamp
Price:
$64.75 each |
| |
|
|
 |
#0200 C Clamp
Self tightening. It's 1½" throat fits over a flange or frame horn to pull from behind. No need to weld a plate onto a damaged area for a holding section. |
#0200
C Clamp
Price:
$64.75 each |
| |
|
|
 |
#0205 Dyna-Mo C
Great for getting over lips or edges. New generation of Mo-Clamp's, including these features: round wedge, cross-hatch tooth pattern, spring loaded. 3 ton capacity. |
#0205
Dyna-Mo C
Price:
$49.00 each |
| |
|
|
 |
#0250 Mini-C Clamp
Self tightening, small, light, versatile. Minimum of 1½" reach around flanges, cowls, pinch welds, and lips. Butts against panels where only narrow bite is available. 1¼" jaws give added grip. |
#0250
Mini-C Clamp
Price:
$59.00 each |
| |
|
|
 |
#0300 Jr. Clamp
Self tightening. Mo-Clamp's top selling clamp. A must for every body shop. 1½" wide bite. |
#0300
Jr. Clamp
Price:
$56.50 |
| |
|
|
 |
#0305 Dyna-Mo Jr.
Thin edged nose for hard to reach places. New generation of Mo-Clamps, including these features: round wedge, cross hatch, tooth pattern, spring loaded. 3 ton capacity. |
#0305
Dyna-Mo Jr.
Price:
$51.00 each |
| |
|
|
 |
#0307 Dyna-Mo Corner
Clamp
With 3 tons of capacity, the Corner Clamp
conforms to the exacting standards of all Mo-Clamp products. Made from
Mo-Clamp Tru-Tuff? heat-treated steel alloy, the 90-degree Corner Clamp uses
a drop forged wedge for added strength. Eliminates the need to use two
seperate clamps and will be able to get into narrow and confined areas.
|
#0307
Dyna-Mo Corner Clamp
Price:
$69.50 each |
| |
|
|
 |
#0350 3-in-1 Boltless Clamp
Easy clamp to use for unitized cars. One pulling housing and three sets of jaws: 1¼", 1½", and 3" wide. Changing jaws is quick & simple. |
#0350
3-in-1 Boltless Clamp
Price:
$143.00 each |
| |
|
|
 |
#0400 W Clamp
Self tightening. Super clamp for tough jobs. It grabs 4¼" of metal to reduce the chance of tearing out a section of sheet metal. |
#0400
W Clamp
Price:
$89.00 each |
| |
|
|
 |
#0405 Dyna-Mo W
Wider tooth to grab more thin metal without tearing. New generation of Mo-Clamps, including these features: round wedge, cross hatch, tooth pattern, spring loaded. 3 ton capacity. |
#0405
Dyna-Mo W
Price:
$51.00 each |
| |
|
|
 |
#0440 Twin Claw Clamp
Self-Tightening. The Twin Claw™ jaws and
drop-forged wedge distribute the clamping load - reducing the possibility of
metal tearing. Sever duty tooth design for maximum gripping bite and
minimized metal distortion. The jaw openings allow use around lips of core
supports and aprons, clamps to floor pans and myriad of other pulls. |
#0440
Twin Claw Clamp
Price:
$68.50 each |
| |
|
|
 |
#0550 T.O. Tight Opening Clamp
NEW DESIGN
For hard to pull areas such as tail light holes, rail ends, clearance light holes, etc. 3 ton
capacity.
NEW DESIGN |
#0550
T.O. Tight Opening Clamp
Price:
$81.50 each |
| |
|
|
 |
#0650 Box Clamp
New Design
A must for pulling on box rail switch welded-on bumper flanges. 4 ton capacity. |
#0650
Box Clamp
Price:
$66.50 each |
| |
|
|
 |
#0655 Dyna-Mo Box Clamp
These heat-treated jaws reach around flanges
and other obstructions to get a grip on hard-to-reach surfaces. Severe duty
tooth design for aggressive pulling power. |
#0655
Dyna-Mo Box Clamp
Price:
$61.00
each |
| |
|
|
 |
#0660 Long Nose Clamp
Similar to the popular #0300 Jr® Clamp,
the Long Nose is self-tightening and includes the original wedge.
Cross-hatch tooth design, spring loaded for easy opening, deeper reach for
hard-to- get-to areas. |
#0660
Dyna-Mo Box Clamp
Price:
$53.50
each |
| |
|
|
 |
#0670 Baby Box Clamp
Self-tightening. Great for single-lip
flanges and inside frame horns. Original wedge; cross- hatch tooth design;
spring-loaded for easy opening. Throat clearance of 1½" high (38 mm), 1¼"
deep (32 mm). |
#0670
Dyna-Mo Box Clamp
Price:
$56.50
each |
| |
|
|
 |
#0680 Big Mouth Clamp
Self-tightening. A perfect solution for
hard-to-get-to areas. Great where large opening is needed. Original wedge;
cross-hatch tooth design; spring-loaded for easy opening. Throat clearance
of 2¼" high (57 mm), 1¼" deep (32 mm). |
#0680
Dyna-Mo Box Clamp
Price:
$63.50
each |
| |
|
|
 |
#0750 Lip Grip w/Side Pull Bracket
Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections. Chain loop permits pulling at any angle. Bracket adds 90° angle for two-directional pulling. |
#0750
Lip Grip w/Side Pull Bracket
Price:
$75.00 each |
| |
|
|
 |
#0800 Tac-N-Pull with Pull Plates
For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3" plates, two 1½" plates, and two 1" plates. |
#0800
Tac-N-Pull with Pull Plates
Price:
$55.25 each |
| |
|
|
 |
#0805 Pull Plate Kit
Supply of reusable plates. Kit includes: five 3" plates, five 1½" plates, and ten 1" plates. |
#0805
Pull Plate Kit
Price:
$29.50 each |
| |
|
|
 |
#1000 Handy Hook
A great time saver with Mo-Clamp's easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Designed for use with 3/8" chain. 4 ton capacity. |
#1000
Handy Hook
Price:
$17.50 each |
| |
|
|
 |
#1100 Handy-Link
Chain too long? Make it shorter! Chain too short? Make it longer! Alloy heat-treated steel. Designed for use with 3/8" chain. 6 ton capacity. |
#1100
Handy-Link
Price:
$16.50 each |
| |
|
|
 |
#1150 Chain Spread Bar
The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps. 5 ton capacity. |
#1150
Chain Spread Bar
Price:
$21.00 each |
| |
|
|
 |
#1200 Twin Pull
Do you have need for a light pull but a larger
gripping area? The Twin Pull enables you to use two clamps side by side for
more pull. Also, can be used with two #1300 Sill Hooks. Designed for use
with ⅜" chain. |
#1200
Twin Pull
Price: $20.50 each |
| |
|
|
 |
#1250 Panel Puller
The Panel Puller is light and easy to use with slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel. 3 ton capacity. |
#1250
Panel Puller
Price:
$32.50 each |
| |
|
|
 |
#1260 Panel Gripper
Mo-Grip and the Panel Gripper's flat, wide,
toothless jaws grip with no distortion for an unbeatable tool. Our widest
right angle jaws and throat allow for access around obstructions. Hands-free
design with custom jaw tightening system allows for safer work environment.
Right angle is great for lips, hoods, roofs and floor pan sheet metal pulls. |
#1260
Panel Gripper
Price: $82.00 each |
| |
|
|
 |
#1300 Sill Hook
One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. Easy chain hook-up. Sill Hook end is 2½" wide. 7 ton capacity. |
#1300
Sill Hook
Price:
$48.00 each |
| |
|
|
 |
#1320 Slim Line Sill Hook
Use this new hook from Mo-Clamp to pull front
hinge pillars, center pillars posts, rear hinge sections or any location
where you need a broad, thin pulling surface. Made from MoClamp Tru-Tuff�
drop-forged, heat-treated alloy steel with a pulling capacity of a full 4
tons. Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip
hooks. |
#1320
Slim Line Sill Hook
Price:
$96.00 each |
| |
|
|
 |
#1350 Versa Hook
Versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Versa Hook end is 2½" wide. 8 ton capacity. |
#1350
Versa Hook
Price:
$83.00 each |
| |
|
|
 |
#1360 Junior Versa Hook
Designed smaller to allow body men to get into tighter areas. Hook end is only 1¾" wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. |
#1360
Junior Versa Hook
Price:
$67.00 each |
| |
|
|
 |
#1450 Numerous Angle Puller
Allows pulls from any angle. Just put the bolt through a 1/2" hole and pull. Use with #2100 or #2400 Multi-Adapter Plate, or with back-up plates. Designed for use with 3/8" chain. |
#1450
Numerous Angle Puller
Price:
$27.50
each |
| |
|
|
 |
#1500 Pull Ring
The Pull Ring for the #2100 2MA Adapter Plate provides for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening. |
#1500
Pull Ring
Price:
$25.00 each |
| |
|
|
 |
#1600 Multi-Purpose Anchor Hook
A valuable, small hook device for use on both conventional frames and unitized bodies. The different ends are used for a variety of pulls and anchoring. The bottom foot can be used with both Mo-Clamp Adapter Plates (#2100 & #2400) for strut alignment. |
#1600
Multi-Purpose Anchor Hook
Price:
$41.75 each |
| |
|
|
 |
#1650 Double Eye Chain Hook
A handy chain hook-up pulling plate for making
double pulls. The special design allows for both wide or narrow pulls.
Double pulls, using multiple self-tightening clamps, can be made from the
same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up
system. Designed for use with ⅜" chain. |
#1650
Double Eye Chain Hook
Price:
$37.50 each |
| |
|
|
 |
#1700 Chain Locking Fork
Handy stopper for chain. Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. Designed for use with 3/8" chain. 8 ton capacity. |
#1700
Chain Locking Fork
Price:
$15.50 each |
| |
|
|
 |
#1800 Track Hook
Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8" chain. |
#1800
Track Hook
Price:
$23.00 each |
| |
|
|
 |
#1950-#1960 Sim Pull
#1950 1¼" hole, #1960 1" hole: Two sizes of holes to fit both American & Foreign portapower pipe. Slides up & down the pipe to work like a pogo stick to push or pull. Used with chain, enables you to work faster not harder. |
#1950-#1960
Sim Pull
Price:
$21.00 each |
| |
|
|
 |
#2100 2MA Multi-Adapter Plate
Designed for vehicles with MacPherson suspension, fits approximately 95% of the various strut bolt patterns. 2MA plates can be used on door post damage, GM Energy Absorbers & frame horns. Includes: 3-4 way legs. |
#2100
2MA Multi-Adapter Plate
Price:
$129.00
each |
| |
|
|
 |
#2400 3MA Multi-Adapter Plate
Designed for a wide variety of strut towers. Pulling in any direction, center strut tower measurements w/tram gauge instruments. Gives additional height and clearance for pulling over & around obstructions. Includes: 3-4 way legs. |
#2400
3MA Multi-Adapter Plate
Price:
$139.00
each |
| |
|
|
 |
#3100 Sheet Metal Hooks (Set of 4)
Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & #0820) to pull, or use in combination with clamps. Includes one each: #3110, #3120, #3130, #3140. 2 ton capacity. |
#3100
Sheet Metal Hooks (Set of 4)
Price:
$124.00 Per Set |
| |
|
|
 |
#4010 Frame Rack Uni-body Clamp
Bar holes designed for three ways of pulling, using Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening. |
#4010
Frame Rack Unibody Clamp
Price:
$129.00 each |
| |
|
|
 |
#4020 4-Way Pull Clamp
Includes Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening. |
#4020
4-Way Pull Clamp
Price:
$92.00 each |
| |
|
|
 |
#4030 3-Way Pull Clamp
Includes Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening. |
#4030
3-Way Pull Clamp
Price:
$61.00 each |
| |
|
|
 |
#4035 Side Pull Angle Bracket
Bolt to surface for a 90-degree straight pull, or use with #4030 3-Way Pull Clamp, #4025 pair of Frame Rack Jaws, or #4010 Frame Rack Uni-body Clamp. |
#4035
Side Pull Angle Bracket
Price:
$34.50 each |
| |
|
|
 |
#4047 Frame Rack Draw Bar
Great for bolting to a frame, uni-body rail or to other places to make a secure pull. Has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs. 3 ton capacity. |
#4047
Frame Rack Draw Bar
Price:
$37.50 each |
| |
|
|
 |
#4050 Multi-Angle Clamp
The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has raised "ears" to hold bolts stationary, for easy tightening. |
#4050
Multi-Angle Clamp
Price:
$ 81.00 each |
| |
|
|
 |
#4110 Single Claw Hook
Drop forged! Use as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain shortener, double hook, bumper hook. Designed for use with 3/8" chain. 7 ton capacity. |
#4110
Single Claw Hook
Price:
$16.75 each |
| |
|
|
 |
#4120 Double Claw Hook
For use as a chain shortener, chain connector or double hook, Designed for use with 3/8" chain. 7 ton capacity. |
#4120
Double Claw Hook
Price:
$25.00 each |
| |
|
|
 |
#4120 Double Claw Hook
Four-way anchoring tool allows unlimited body and
frame hook-up in existing holes. Fastens directly to ⅜" chain.
Overall Length: 51/2" (146 mm)
Weight: 5 lbs (2.27 kg)
Capacity: 5 tons (4,536 kg) |
#4130
Double Claw Hook
Price:
$39.50 each |
| |
|
|
 |
#4145 Double Grab Hook Assembly
For easy 3/8" chain connection. Another time saving tool. 10 ton capacity. |
#4145
Double Grab Hook Assembly
Price:
$27.50 each |
| |
|
|
|
|
