MIN. UPS ORDER IS $50.00,  MIN. TRUCK ORDER IS 250 LBS. OF MIX & MATCH MATERIALS.  FOR MORE INFO CHECK THE COMPANY POLICY SECTION.


Call Us Toll-Free Mon. - Fri. 9a - 5p To Place An Order Or Ask Questions:
1-800 541-0399

To Fax An Order To Us:
1-502 966-2239

Mail Us An Order At:
Smart Shoppers
4200 Produce Rd.
Louisville, Ky. 40218

Retail Store Hours

Mon.–Fri. 10a-6p Sat. 10a-3p

For more info in determining prices & shipping cost please see the help and/or company policy section

 


Autobody Supplies
Spray Guns & Accessories
Automotive Finish Products
Automotive Refinish Products
New Item Links
Paint Spray Booth Accessories
Compounds, Polishes & Waxes
Electric Buffers
Buffing Pads
Masking Products
Body Molding
Pinstripes
Sandpaper/Abrasives
Shop & Hand Tools
Air Tools
Respirators &
Fresh Air Systems
Sand Blasters
Air Fittings/Couplers
Clamps/Pulling Products

 

 

Kits & Limited Specials

 

 

 
 
Audio Equipment Section

 

Tire & Wheel Section

 

Bolt-On Section
 

 

 

 
Clearance Section

ALL THINGS CLEARANCE


 
 

Motor Guard

 

The Disposable Desiccant Filter by Motor Guard
  • Motor Guard's newest addition to its compressed air filter line. The only disposable compressed air filter for spray guns that includes a unique color change indicator to signal time to change out the filter.
  • Absorbs oil, condensed moisture, and contaminants as small as 5 microns. Attaches directly to the air inlet of the spray gun.
  • Colors May Vary
DD-1008 Disposable Desiccant Filter Specifications
Model No. Application Pipe Size Max Flow
@ 80 psi
Maximum
Pressure
Removal
Rating (NOM.)
Size
DD-1008 3 1/2" x 1 1/2" 1/4" NPS/NPT 100 psi 20 CFM 5 Microns Spray Gun
Part #
Description
Price Each
DD1008 - CJ Disposable Desiccant Filter $ 7.50

 

The Disposable Compressed Air Spray Gun Filter by Motor Guard
d12
  • For years, the Motor Guard's D-12 Disposable Spray Gun Filter has been the answer to the painter's worst nightmare - FISHEYE! Now, with the introduction of High Volume, Low Pressure (HVLP) spray guns using shop air, comes even more critical requirements for clean, dry, oil free air supplying the paint gun.
  • Designed to remove the smallest contaminant particle, oil-aerosol or drop of moisture to supply clean, dry, oil free air to your spray gun. Users of the D-12 report reduced paint defects, resulting in increased paint department productivity with the ultimate final finishes.
D-12 Disposable Filter Specifications
Model No. Application Pipe Size Max Flow
@ 80 psi
Maximum
Pressure
Removal
Rating (NOM.)
Size
D12 Spray Gun/ Air tools 1/4" NPS/NPT 30 CFM 100 PSI 01 Microns 2 1/2" x 2 1/2
Part #
Description
Price Each
D-12-1 Disposable Filter $ 5.00

 

Motor Guard Filter Kit General Information

The key to our efficiency is based on compressing the element axially and forcing it to expand radically against the tapered walls of the housing. This forces the air to pass between the tightly compressed layers along the length of the element, creating a true depth filter Vs. the conventional method of passing the air through layers of media.
Using this unique method of filtration creates a labyrinth of sub-micronic openings from the interlocking fibers on the fabric surfaces, entrapping particles as small as .01 microns.
All this incredible filtration is accomplished while at the same time the patented compression technique maintains an optimum filter density, providing maximum efficiency with a minimum pressure drop at the optimum flow rate.
The M-60 gets serious with it's .01 micron discrimination. We're talking clean air, here. The non-degrading, disposable filter contains nothing to contaminate any system. In choosing this module, make sure you're backed up with a unit like the Ambush just before the M-60, to trap the really coarse stuff. This unit maintains 100 CFM at 80 PSI.

Compressed Air Filter - Sub-Micronic Specifications
Model No. Pipe Size Max Flow
@ 80psi
Maximum
Pressure
Removal
Rating (NOM.)
Size Replacement
Element

M-30 1/4 NPT 45 CFM 125 psi .01 Micron 5" x 7" M-723
M-60 1/2 NPT 100 CFM 125 psi .01 Micron 5" x 7" M-723

 

Motor Guard M-30 / M45-Kit
  • 1/4" NPT Inlet & Outlet
  • The Ultimate Defense From Damaging Dirty Air
  • The perfect final filter
  • Eliminates paint failures caused by particulates, moisture and oil aerosol contaminates as small as .01 micron.
  • The air tool saver. Extends the life of your tools by protecting bearings and precision parts from dirty, oily watery contaminants
  • Contains 1 M-30 Filter housing with hardware
  • Comes with 3 elements (filters) total. Comes with 1 element installed and 2 extra
Part #
Item
Price Each
M-45-KIT Filter Kit with 1/4" in and out $ 79.50
MG-21060 Replacement Gasket (goes in between the top and bottom half of the filter) $ 1.00

 

Motor Guard M-60 / M100-Kit
M-60
  • 1/2" NPT Inlet & Outlet
  • The Ultimate Defense From Damaging Dirty Air
  • The perfect final filter
  • Eliminates paint failures caused by particulates, moisture and oil aerosol contaminates as small as .01 micron.
  • The air tool saver. Extends the life of your tools by protecting bearings and precision parts from dirty, oily watery contaminants
  • Contains 1 M-60 Filter housing with hardware
  • Comes with 3 elements (filters) total. Comes with 1 element installed and 2 extra
Part #
Item
Price Each
M-100-KIT Filter Kit with 1/2" in and out $ 79.50
MG-21060 Replacement Gasket (goes in between the top and bottom half of the filter) $ 1.00

 

Motor Guard Replacement Element for Air Filter
  • Air flows between layers
  • Removes to .01 microns
  • Minimal pressure drop
  • Depth filter element
  • Dense hydrophilic fiber
  • Non-degrading
  • Contaminant free
  • Compresses in housing
Part #
Item
Price Each
M-723 Single Replacement Element $ 7.50

 

Motor Guard Activated Carbon Filter MC100-Kit
  • 1/2" NPT Inlet & Outlet
  • The Motor Guard Model MC100 Activated Carbon Filter removes oil vapor and other contaminants from compressed air through the adsorption process. In this process, microscopic pores in the activated carbon media trap individual oil molecules while clean air passes through.
  • As shops are learning, the new waterborne automotive finishes require new air treatment tools. Waterborne finishes require air that is free of oil vapor. Standard oil removing filters absorb oil mist and fine droplets while vaporized oil passes right through where it causes finishing flaws.
  • The Motor Guard's Activated Carbon Filter features the exclusive Carbon-cartridge. The filter element contains an expanded volume of activated carbon media to deliver air to the spray gun that is virtually free of oil vapor (<.01 ppm by weight). Designed for maximum airflow at a minimum pressure drop, the extended carbon content of the Carbon-cartridge means that compressed air spends the maximum time in contact with the carbon media for more complete vapor removal.
  • The addition of the MC100 as the final stage in an existing air management system ensures defect-free finishing with waterborne or any finishing materials.
  • Replacement elements sold in a (2) twin pack only
Part #
Item
Price Each
MC100-KIT Filter Kit with 1/2" in and out $ 89.50
M - 785C Twin Pack Replacement Activated Carbon Filters For the MC-100 Only $ 42.00

 

AF - 4510 Particulate Filter by Motor Guard
  • 40 micron sintered bronze serviceable element.
  • Highly visible, ball-float type sight glass.
  • Non-clogging manual drain.

 

AF-4510 Filter Specifications
Model No. Disc. Pipe Size Max Flow
@ 80 psi
Maximum
Pressure
Removal
Rating (NOM.)
AF4510 Particulate 1/2" NPS/NPT 100 psi 250 CFM 40 Microns
Part #
Description
Price Each
AF - 4510 Particulate Filter $ 37.50