|
|
|
|
STECK - Door Jammer Tool
|
 |
- Super tough alloy
steel.
- Holds door open while
you hammer, pull, grind, sand, or paint.
- For doors and deck
lids.
- Holds solid.
- Fits almost any size
latch.
|
|
|
Part #
|
Item
|
Price
Each
|
| 17000 |
The Door Jammer Tool |
$ 14.50 |
|
STECK - The Hatch Jammer
|
 |
- Easily holds hatches
open and secure for prep, paint, buffing and
paint less dent removal.
|
|
|
Part #
|
Item
|
Price
Each
|
|
17100 |
The Hatch Jammer |
$ 21.50 |
|
STECK - The Original Complete Pull Rod Set
|
 |
- Super tough alloy
steel.
- Factory tested under a
500 pound (228kg) load.
- Vinyl coated handles.
- Set includes: 4 Pull
Rods, 2 Pick Pulls, 1 Stainless Steel Straight
Edge, 1 HS Split point drill bit and 1
instruction sheet.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20000 |
The Original Pull Rod Set |
$ 29.50 |
|
STECK - Pick Rods 2 piece set
|
 |
- Super tough alloy
steel.
- Factory tested under a
500 pound (228kg) load.
- Vinyl coated handle.
- Set Of 2
|
|
|
Part #
|
Item
|
Price
Each
|
|
20007 |
Pick Rods |
$ 9.00 |
|
STECK - Pick Pulls 2 piece set
|
 |
- Super tough alloy
steel.
- Factory tested under a
500 pound (228kg) load.
- Vinyl coated handle.
- Set Of 2
|
|
|
Part #
|
Item
|
Price
Each
|
|
20008 |
Pick Pulls |
$ 9.00 |
|
STECK - Super Seam Buster
|
 |
- Super tough alloy
steel.
- Attaches to your air
hammer for fast, efficient separation of quarter
panels, rockers, other pinchwelds and bonded
door skins.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20017 |
Super Seam Buster |
$ 36.00 |
|
STECK - Quarter Puller
|
 |
- Pulls rear quarter &
wheel well.
- Hooks above the lip of
wheel opening.
- Two curvatures, one on
each side, will fit most cars.
- 3,000 lbs. max pull.
- use the Quarter Puller
II for smaller openings.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20022 |
Quarter Puller |
$ 32.00 |
|
STECK - Quarter Puller II
|
 |
- Pulls rear quarter &
wheel well.
- Hooks above the lip of
wheel opening.
- Two curvatures, one on
each side, will fit most cars.
- 3,000 lbs. max pull.
- Quarter Puller for
Larger openings.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20033 |
Quarter Puller II |
$ 30.00 |
|
STECK - Flange Lever
|
|
|
-
Quickly access hard to reach
damaged flange frames, door and hood edges as
well as radiator supports to bring back to
proper edge alignment. A unique double ended
revers 1/4 inch hook design, made from hardened
alloy steels, gives the technician easy access
to buckled metal edges. A flat hook allows for
easy manual alignment while the 35 degree angle
bar allows technician to access areas like
radiator supports. Flange Lever design allows
for mulitple angles to gain hand clearance for
fland and/or angled pulls while using the body
of the tool to provide maximum leverage for
manipulating the damaged flange or edge panel.
Quick movement along the damaged area allows for
multiple metal manipulations without needing to
unlock and relock locking pliers used today to
perform flange repairs.
|
 |
|
|
Part #
|
Item
|
Price
Each
|
|
20037 |
Flange Lever |
$ 16.00 |
|
STECK - Panel Shaper Kitl
|
 |
-
The Panel
Shaper is an air hammer driven set of three self
lubricating Nylon reinforced heads that allow
the technician to easily access deep reach areas
and badly deformed sheet metal surfaces to form
them back to original shapes. Each kit contains
three unique Nylon head shapes with arbors that
allow each tool to be attached to your air
hammer to fix body lines, concaved areas and
flat surfaces.
1. Chisel Head
- works with door, body lines, corner shaping
and fender edges.
2. Rounded Head
- straightens out wheel house and quarter panels
3. Flat Head
- straightens out floors, trunk floors and
provide stress relief in the repair process.
Using the Panel Shaper’s with
your air hammer gives needed vibration along the
damaged frame areas providing stress relief and
molecular realignment in the frame structure.
Panel Shaper kit also allows you to form custom
shape patch panels and to fabricated panels.
Heads can also be customized by grinding the
head to any specific angle and shape required to
perform the repair. In the typical repair
processes each head should last 10 work hours.
Labor/Material Savings:
Saves the technician arm
fatigue and up to two hours of repair time over
traditional hammer repair.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20046 |
Panel Shaper Kit |
$ 37.50 |
|
STECK - Uni-Pull
|
 |
- Universal frame rail
puller.
- Pull front & rear
rails.
- Straight or angular
pulls.
- 10,000 lb pulling
capacity.
- 1001 uses in pulling
uni-body & frame cars, trucks.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20066 |
Uni-Pull |
$ 24.50 |
|
STECK - Ram Puller
|
 |
- Hook bolt heads,
flanges, anywhere...
- For use with a 4 Ton
Ram.
- Use your push ram for
pulling.
- Use 1/4" or 3/8"
chain.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20077 |
Ram Puller |
$ 55.00 |
|
STECK - EZ Pull Pliers
|
 |
- 3.5 inch jaws for
multiple uses
- Grip and pull Multiple
pins.
- For pull pins and
flanges.
- Pulls up to 2000 lbs.
|
|
|
Part #
|
Item
|
Price
Each
|
|
20085 |
EZ Pull Pliers |
$ 36.00 |
|
STECK - Pogo II
|
 |
-
One hand operation.
- Core supports repaired
quickly.
- Hook bolt heads,
flanges, anywhere...
- Fits in your toolbox
(overall length 18-3/8")
|
|
|
Part #
|
Item
|
Price
Each
|
|
20099 |
Pogo II |
$ 44.00 |
|
STECK - Mighty Midget Panel Clamps
|
 |
-
Clamps panels in place for
welding.
- Small profile allows
door to to be closed for alignment check before
welding.
- Heat treated high
carbon steel.
- 5 per pack
|
|
|
Part #
|
Item
|
Price
Each
|
|
20100 |
Mighty Midget Panel Clamps |
$ 6.50 |
|
STECK - Handy Pull Kit
|
 |
-
Handy Pull eye bolts allow
you to pull hinges, etc. A hood hinge plate
allows you to pull hood and deck lid hinges back
into position.
-
KIT INCLUDES:
• Right Angle Pulling Plate • 10mm Eye Bolt •
8mm Eye Bolt • 6mm Eye Bolt • Hood Hinge Plate
|
|
|
Part #
|
Item
|
Price
Each
|
|
20222 |
Handy Pull Kit |
$ 28.50 |
|
STECK - Universal Molding Release Tool
|
 |
-
Slide tool left or right
under molding until it hooks a retaining clip.
- Then just rock the
tool with a twist of the wrist.
- Heat treated.
- High carbon steel.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21500 |
Universal Molding Release Tool |
$ 4.50 |
|
STECK - EZ Strip Molding II Tool
|
 |
-
For removing adhesive
backed body molding and emblems.
- Wedge can be trimmed
to fit different body lines.
- Includes steel air
hammer arbor and extra wedge.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21542 |
EZ Strip Molding II Tool |
$ 21.50 |
|
21543 |
Replacement Head For EZ Strip Molding II
Tool |
$ 7.00 |
|
STECK - Ford Headlight Retaining Clip Tool
|
 |
-
Two finger spread locking
tabs to release them.
- Tang of tool lifts
back of clip to clear locking tab on panel.
- Removes clip without
damage, even in confined spaces.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21550 |
Ford Headlight Retaining Clip Tool |
$ 13.50 |
|
STECK - Antenna Wrench Multi - Tool
|
 |
-
Fits most antenna bezel
nuts, domestic and foreign.
- Simple and compact.
- Compared to a socket
set, it's easier to use and to carry.
- Rugged steel
construction for many years of use, costs much
less then buying several different wrenches.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21600 |
Antenna Wrench Multi - Tool |
$ 14.00 |
|
STECK - Trim Pad Removal Tool
|
 |
-
Grips firmly while
supporting the trim pad.
- Pry's out the clip
without damage, pry's against hidden surfaces,
will not mar exposed areas.
- Heat treated high
carbon steel.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21700 |
Trim Pad Removal Tool |
$ 4.75 |
|
STECK - Sure Grip Trim Clip Plier Tool
|
 |
-
The best tool to remove
trim pads & insulation.
- Fastest and easiest
way to remove trim clips.
- Won't break clips.
- Easy when removing
"Tough" clips.
- "Grip The Stem Not The
Head."
|
|
|
Part #
|
Item
|
Price
Each
|
|
21720 |
Sure Grip Trim Clip Pliers Tool |
$ 16.50 |
|
STECK - Door Hinge Pin Popper Tool
|
 |
-
Removes door hinge pins
fast.
- Drives out even
stubborn hinge pins.
- Direct impact.
- Clearance for door
panels.
- Works on almost all
cars with removal hinge pins.
- Includes pin puller to
remove loosened pins.
- Color may vary.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21835 |
Door Hinge Pin Popper Tool |
$ 17.50 |
|
STECK - Door Aligning Tool
|
 |
-
The fastest means of
aligning doors with welded hinges.
- Heat treated, high
carbon steel.
- Color may vary.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21845 |
Door Aligning Tool |
$ 21.75 |
|
STECK - Skin Zipper
|
 |
-
An air hammer powered
means of skinning a door quickly.
- Usually Skins a door in less
than 10 minutes.
- Get between 9 - 12 doors per head
- Replaceable heads available.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21890 |
Skin Zipper Tool |
$ 23.50 |
|
21891 |
Replacement Head |
$ 13.50 |
|
STECK - GM Light Truck / Car Door Spring Tool
|
 |
-
Safest tool available for
coil springs in GM doors.
- Compresses springs for
easy, safe removal.
- Sides safely enclose
spring.
- Heat treated, high
carbon steel.
- Color may vary.
|
|
|
Part #
|
Item
|
Price
Each
|
|
21910 |
GM Light Truck / Car Door Spring Tool |
$ 12.00 |
|
STECK - S10/S15 Rear Door Spring Tool
|
|
|
|
Part #
|
Item
|
Price
Each
|
|
21915 |
S10/S15 Rear Door Spring Tool |
$ 12.75 |
|
STECK - Plug-Weld Pliers
|
 |
-
Copper alloy backing plate
prevents burn thru (weld will not stick to
copper alloy).
- Allows you to turn up
the heat for better penetration without burn
thru, even if you have a pilot hole through the
back.
|
|
|
Part #
|
Item
|
Price
Each
|
|
23230 |
Plug-Weld Pliers |
$ 26.00 |
|
STECK - Lockout Tools Kits
|
 |
-
Unlock Cars in seconds
without damage.
- Unlock cars with
digital and electric locks.
- 32 page instruction
book list over 100 makes and models of cars with
specific unlocking instructions.
- Comes in Plastic Pouch
|
|
|
Part #
|
Item
|
Price
Each
|
|
32565 |
For Corsica, Berretta and other mid 90's GM Models |
$ 15.50 |
|
32700 |
For use with most automobiles |
$ 47.50 |
|
STECK - The Big Easy Complete Lockout Tool Kit &
Accessories
|
|
|
|
Part #
|
Item
|
Price
Each
|
|
32900 |
Big Easy Complete Lockout Tool Kit |
$ 26.00 |
|
32903 |
Big Easy Loop |
$ 7.00 |
|
32922 |
Inflatable Easy Wedge |
$ 23.50 |
|
32924 |
Paint Protector Tool |
$ 4.00 |
|
STECK - Align - A - Gauge
|
|
-
Check alignment while the
car is still on the bench.
- Check Camber, Check
Toe, for Bent Struts and rear wheel alignment.
- Comes in Metal Carry Case
|
|
|
Part #
|
Item
|
Price
Each
|
|
35100 |
Align - A - Gauge |
$ 127.50 |
|
STECK - Spec Out Nib Files
|
 |
-
Removes Runs and Dirt
Nibs.
- Honed tips of teeth
shave without digging in.
- Available in fine or course
|
|
|
Part #
|
Item
|
Price
Each
|
|
35250 |
Spec Out Nib File - Course |
$ 12.00 |
|
35260 |
Spec Out Nib File - Fine |
$ 12.00 |
|
Steck Double Density Sanding Block |
 |
- These
sanding blocks were designed for wet or dry sanding.
- 2 1/2" x
5 5/8"
- The
Double Density Sanding block has two densities to accommodate a
variety of sanding needs.
- Gray
Side - Soft & Pliable
- Black
Side - Stiff
|
|
Part
# |
Description
|
UPS
Each |
Truck
Each |
|
35300 |
Double Density Block |
$
4.50 |
$
4.50 |
|
STECK - Paint 'N Stick
|
 |
-
Autobody Side View Mirror
Holder.
- Great For Painting All
Sides At Once.
- Powerful Magnets
Attach Anywhere For Hands Free Drying.
- Multiple mounting holes.
|
|
|
Part #
|
Item
|
Price
Each
|
|
35660 |
Paint and stick |
$ 16.00 |
|
STECK - Door Lock Covers
|
 |
-
Save Time Masking!
- Fits Many Cars!
- 12 Piece Set.
|
|
|
Part #
|
Item
|
Price
Each
|
|
35730 |
Door Lock Covers |
$ 7.00 |
|
STECK - Measure 'N Stick
|
 |
-
Autobody Tape Measure.
- Hands free measuring.
- Continuously monitor
your pull, measure without an assistant.
- For body men,
insurance adjusters, and fabricators.
- ¾"x16' - hole slide
moves three ways.
|
|
|
Part #
|
Item
|
Price
Each
|
|
36000 |
Measure and stick |
$ 32.50 |
|
STECK - Wing Nut Socket
|
 |
-
The Wing Nut Socket removes those plastic wing nuts the retain many taillight assemblies. Quarter inch drive.
|
|
|
Part #
|
Item
|
Price
Each
|
|
71300 |
Wing Nut Socket |
$ 6.50 |
|
STECK - Pop Rivet Stoppers (Set Of 3 w/Plastic
Case)
|
 |
-
Drill out Pop Rivets FAST! Stops pop rivets from
spinning while you drill. Teeth bite rivet
(hardened steel) Saves time and aggravation.
If you don't need the whole set, you can buy
them individually.
#71401 - 1/8"
#71403 - 3/16"
#71405 - 1/4"
|
|
|
Part #
|
Item
|
Price
Each
|
|
71400 |
Pop Rivet Stoppers (Set Of 3 w/Plastic Case) |
$ 39.50 |
|
71401 |
1/8" Pop Rivet Stopper |
$ 15.75 |
|
71403 |
3/16" Pop Rivet Stopper |
$ 15.75 |
|
71405 |
1/4" Pop Rivet Stopper |
$ 15.75 |
|
STECK - Plastic Super Scraper
|
 |
-
Tough plastic handle can be hit with a hammer
-
Resharpen when needed with a file!
-
Removes stick-on wheel weights from alloy
wheels.
-
Removes gaskets from aluminum parts.
-
Removes decals, emblems and small molding
without scratching the paint.
|
|
|
Part #
|
Item
|
Price
Each
|
|
71510 |
Plastic Super Scraper |
$ 11.00 |
|